top of page

Search


Oil Change, some new fluids
We recently changed our oil as well as the oil filter. We believe our car is now ready to try to be started now we have put new fluids...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Mar 8, 20211 min read


ICM and Ignition Coil Installment
Over the weekend our group put in the new ignition coil and ignition control module into the car. Hopefully, these parts can help the car...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Mar 3, 20211 min read


Distributor Cap & Rotor installed/Ignition Relay Installed
Today we installed our new distributor cap and rotor, as well as a new ignition relay. These are pivotal parts that Mr. Barrett believes...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Feb 22, 20211 min read
Inclement Weather Update
Due to the inclement weather around Texas, our group has been unable to work on our car. However, we still have received the parts...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Feb 20, 20211 min read
Minor Changes
Last weekend we worked to try to fully install the tank into the car, but we only got to put the fuel neck on. Sadly, we did not get any...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Feb 3, 20211 min read


Fuel Tank Reinstallation Progress
Today we tried to reinstall our fuel tank into the Bronco, but we ran into a few problems. First, we began by jacking the car up on one...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Jan 24, 20211 min read


Fuel Pump & Spark Plug installation
Today we installed our new fuel pump into the fuel tank as well as the new spark plugs. While installing the spark plugs, we tried to...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Jan 18, 20211 min read


Fuel Tank Cleaned/Past 2 Weeks Update
Over the winter break, one of our group members, Jameson, caught COVID and had to quarantine for two weeks. This slowed our progression...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Jan 10, 20211 min read


Fuel Tank Out and Being Cleaned
We have recently uninstalled our fuel tank to clean it. After taking it out, we realized there was still a great amount of old gasoline...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Dec 17, 20201 min read


Motor Turnover/ Solutions
We got our flywheel to spin and the motor and crankshaft are turning over but there is no combustion (see attached video). We believe it...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Dec 8, 20201 min read


Past two weeks update.
Over the past two weeks, we have not got a ton done because everyone in our group has been busy with sports, work, and other activities...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Nov 19, 20201 min read
Battery Acquired
We finally have received the money from our GoFundMe and we immediately bought the battery we need, as well as the cables. We will most...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Oct 27, 20201 min read


Maintenance Work and Tire Removal
This past weekend, our group decided to clean up the car and our workspace, since we are still waiting on our money to transfer through....
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Oct 13, 20201 min read


Starter & Battery Removal
Last weekend our group removed the starter to get a better look at the part to see if we are ordering the right type of starter. We...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Oct 8, 20201 min read
GoFundMe Update Procedural Changes
Our treasurer, Yutaek Oh, has initiated the GoFundMe withdrawal 3 days ago, yet the money has not been withdrawn yet. It does take 2-5...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Oct 1, 20201 min read
2nd Week/GoFundMe Issues
This past weekend we did not do any work on sight, because we are still trying to order the parts using our money from GoFundMe. There...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Sep 25, 20201 min read


First Day's Work
This past weekend, two members of our group, Yutaek Oh and Jameson Cronin, went with our mentor, Baxter Ferguson, to check out the Bronco...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Sep 15, 20201 min read
We started a GoFundMe!
Recently our group started a GoFundMe and have set out to try to fund the Bronco restoration. Although the owner of the Bronco is...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Sep 9, 20201 min read


We now have acquired the Bronco!
This past weekend we secured the Bronco and managed to get it to Mr. Emery's place where we will be working on it. We are very excited to...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Sep 9, 20201 min read
Crowdfunding Possibility
Although the owner of the car is primarily funding the restoration of the Bronco, we do not want to leave all the expenses to him. We are...
.JPG/v1/fill/w_320,h_320/file.jpg)
Jameson Cronin
Sep 1, 20201 min read
bottom of page